Before you start
- Confirm whether the login page asks for one code or two credential fields.
- Check vendor restrictions before choosing length and character type.
Procedure
Follow these steps in order
Choose Code only
Customers enter one voucher code. Select numeric, alphabetic, or mixed characters and the supported length.
Choose Username and password
K7abeer generates and prints two separate values. Credential length can start at four characters where the target device permits it.
Respect vendor defaults
Grandstream controller vouchers default to 10 numeric digits. Other controllers may impose their own format or generate credentials themselves.
Preview before generating
The package summary and voucher design must show the selected mode. For username/password mode, both fields must appear in the preview.
Run a small login test
Generate and install one credential, then use the exact printed fields on the captive portal before generating a production batch.
Verify success
- The generated records match the selected credential mode.
- The PDF or print design shows package and network name plus every required credential.
- The portal accepts the printed values.
Troubleshooting
Username/password mode still prints one code
Confirm the package credential mode, choose a compatible print design, regenerate a test batch, and verify the target MikroTik profile or controller mapping.
Controller rejects the selected length
Use the vendor-required format. Grandstream vouchers should remain at the 10-digit numeric default unless the controller explicitly supports another format.
Was this guide helpful?
Your response helps the system owner prioritize documentation updates.